Plant-specific engineering advisor

Your plant’s engineer.
On every shift.

MIDAS knows your plant’s design, re-runs the engineering at today’s conditions, and answers in plain language, typed or spoken. It runs entirely at your site.

MIDAS-AI hawk eye
The question every plant asks

How is the plant running today?

Every shift, every morning meeting and every corporate review comes back to one question. It sounds simple. Answering it honestly is not.

A plant was designed against a specific case. Over months and years the feed changes, exchangers foul, equipment ages, and operators make reasonable adjustments to keep the unit on line. No alarm sounds, because nothing has failed. But the plant drifts somewhere nobody chose, and the only comparison most people have is today against yesterday.

A control system holds a setpoint. It does not know what the setpoint should be, or that the right answer changed when the inlet composition did. MIDAS keeps the plant’s own design basis in view, compares it with how the plant is actually operating, and explains the difference in plain language to anyone who asks.

What MIDAS actually does

One advisor. Every answer sourced.

Answers questions about the plant

Design limits, what connects to what, which relief valve protects a vessel, whether a stream will make liquid. Typed or spoken.

Says what happened, and whether to believe it

“Anything happen around 3 this morning?” “Is that transmitter stuck?” It asks about anything it notices, suspecting the instrument first.

Re-runs the design at today’s conditions

What each piece of equipment should be doing right now, set beside what it is doing.

Works as a design tool too

Any calculation, walked through one question at a time, or a whole flowsheet you draw and solve, for plant equipment or a design that does not exist yet.

Catches drift early

Compares today with the design and with the plant’s own history, to find equipment falling behind before it becomes off-spec product or lost production.

Facts only

Every number traces to your plant documents or a deterministic calculation. When it doesn’t know, it says so.

Built for every role

Same plant. The answer each person needs.

Questions, not verdicts

An advisor should ask, not tell.

In a plant, an answer that can’t be checked is worse than no answer, because somebody will act on it. A missing answer prompts a question. A confident wrong answer prompts an action. So when MIDAS notices something, it asks, and it suspects the instrument first.

A VERDICT
The exchanger is fouled. Schedule a cleaning.

What if the meter is drifting? Someone just acted on a guess.

HOW MIDAS SAYS IT
“MIDAS noticed the exchanger’s heat transfer has dropped beyond its uncertainty. Could it be:
  1. the flow meter reading low?
  2. a temperature transmitter?
  3. fouling?”
Instruments firstKnown events firstAmbient accounted for
Why it was built the way it was

Answers you can check.

1

Local: it runs at your plant

One workstation at the site. No cloud account, no AI subscription, no vendor holding your P&IDs or operating data. The language model runs on the workstation, so there are no per-question charges: ten questions or ten thousand cost the same. It keeps working when the internet link goes down.

2

Secure by design

Plant data never leaves the site. Read-only to the control system. Verified plant facts cannot be edited through MIDAS. One account per person, by role, and every action recorded in a tamper-evident log that can be verified and exported.

3

Advisory, not in control

MIDAS informs people; it does not run the plant and issues no instructions. It reports what the record and the calculations show, states what it could not determine, and leaves the decision with the people responsible.

4

The AI and the engineering are kept apart

Language models are good at understanding a sentence and poor at engineering. In MIDAS the language model only understands the question and writes the explanation. Every number comes from a deterministic engineering core: same inputs, same answer, every time.

5

Facts only

Every value carries its source: the document, the sheet, the cell, or the calculation and method. When two documents disagree, MIDAS shows both. Outside a method’s tested range it still answers, with a warning naming the range.

PLANT FENCE LINE MIDAS workstationmodel · voice · engineering coreHistorianread-onlyControl systemread-only · never writesYour peopleadvisory · people decide No internetrequired
The troubleshooting screen

Every trend, inside its normal band.

Several instruments on one chart, each drawn inside its normal band for that hour, with calibrations, logbook entries, shift changes and night hours on the same timeline. Anything MIDAS noticed is marked; click it to see its question. Compare periods, plot one instrument against another, or hand the view straight to Ask.

Illustrative chart.

CAL LOG ? nightshift change
■ normal band■ calibration■ logbook● MIDAS noticed
What MIDAS is not

Clear about its limits.

  • Not a control system. It does not move valves, change setpoints or replace the PLC or DCS.
  • Not a replacement for the engineer or operator. It puts the design basis and the calculations in front of people. Judgment stays with them.
  • Not a chatbot fed your documents. The plant record never goes into the language model. Every number is computed fresh from the verified record.
  • Not an oracle. The written explanation is labelled as such. The numbers are what to rely on, and each one can be traced and checked.
Bringing MIDAS to your plant

Built for one plant.

  • Plant documents: P&IDs, equipment datasheets, line and relief valve lists, heat and material balances and the design basis, reviewed fact by fact by a qualified person.
  • Operating data: read-only access to the historian and the control system.
  • A workstation at the site: one machine with a capable graphics processor. No cloud and no internet connection required.
  • An engineering review of the facts, calculations and site settings before MIDAS goes into service. Every installation starts clean, holding nothing from any other plant.

MIDAS was developed and proven against an actual plant’s design basis, documents and simulation cases, and tested against an actual PLC. Every requirement, design decision and acceptance was ruled by a chemical engineer with field experience in midstream gas processing.

Talk to us

See what MIDAS would do for your plant.

Ask for a walkthrough, the MIDAS documents for your role, or a conversation about your plant. Every installation is built on that plant's own records, so the first step is a conversation.

Or email info@midas-eng.com.